Homepage
Wiki
26.01.2018, 04:29
Hi, I'm adding to this thread because I have a potentially related problem with an Avin Avant 3 in an E39 M5 with DSP and NAV.
I was able to use NCS expert to code "mid_base" (my car had "bordmonitor" set by default); "polling_timeout" was already enabled. This did not enable sound for me. I also did a factory coding (empty .man file), which reverted to "bordmonitor" - I changed back to "mid_base". Still no sound.
I needed to reconnect the factory radio in the trunk to the amp to be able to poll and program the DSP - with the Avant 3 connected there was no response from the DSP. When I reconnected the factory radio sound came out even without the original head unit installed (from the last station I had tuned the radio to before installing the Avant). After coding per the above and reconnecting the Avant, I again can't poll the DSP - the Avant seems not to turn on the DSP.
Any ideas?
I was able to use NCS expert to code "mid_base" (my car had "bordmonitor" set by default); "polling_timeout" was already enabled. This did not enable sound for me. I also did a factory coding (empty .man file), which reverted to "bordmonitor" - I changed back to "mid_base". Still no sound.
I needed to reconnect the factory radio in the trunk to the amp to be able to poll and program the DSP - with the Avant 3 connected there was no response from the DSP. When I reconnected the factory radio sound came out even without the original head unit installed (from the last station I had tuned the radio to before installing the Avant). After coding per the above and reconnecting the Avant, I again can't poll the DSP - the Avant seems not to turn on the DSP.
Any ideas?